UTS3000A
The UTS3000A series are signal analyzers with a frequency range of 9 kHz to 8.4 GHz. It can be used as the main equipment required to build an automatic control system. At the same time, it can meet your different testing and application needs in the testing systems required for enterprise R&D/factory production/education and scientific research, etc.
9kHz~8.4GHz
Frequency Range
1Hz~10MHz
RBW
-102dBc/Hz @10kHz
Phase Noise
-165dBm
DANL
YES
Trace Generator
10.1 inch TFT LCD(touch screen)
Display
40 MHz(opt.)
Analysis Bandwidth
KEY FEATURES
Model
UTS3084A
FEATURES
Excellent selectivity
Selectivity factor up to 4.8:1. Better ability to distinguish adjacent signals
VNA Vector Network Analysis
The VNA mode can accurately characterize the network properties of the DUT by measuring the S11 and S21 parameters of the components and circuit network.
Phase Noise Analysis
One click phase noise analysis enables fast, accurate, and repeatable phase noise measurements, significantly simplifying complex analysis workflows.
Real Time Spectrum Mode
Real-time bandwidth optional 40MHz, 100% POI is only 6.68μs, effectively capturing transient signals and measuring them accurately.
FMT Mask
Trigger measurements of episodic or transient signals via frequency template triggering
VSA Vector Signal Analysis
ASK/FSK/PSK/QAM/MSK/DPSK digital modulation signal analysis and EVM calculation
Analog Demodulation Analysis
AM, FM, PM demodulation analysis, rapid analysis of modulated signals
EMI analysis
Optional EMI analysis kit for EMI pre-compliance tests
One-key advanced measurement
ACP，
Channel Power，
CNR，
Harmonics，
Occupied，
Spectrum Monitor，
TOI，
T-power
MODEL
| Model | Bandwidth | Analog Channels | Real-time Sample Rate | Max. Memory Depth | Waveform Capture Rate | Digital Channels |
|---|---|---|---|---|---|---|
 UTS3084A |
9kHz~8.4GHz | 1Hz~10MHz | -102dBc/Hz @10kHz | -165dBm | Yes | 10.1 inch TFT LCD(touch screen) |
 UTS3060A |
9kHz~6.0GHz | 1Hz~10MHz | -102dBc/Hz @10kHz | -165dBm | Yes | 10.1 inch TFT LCD(touch screen) |
 UTS3036A |
9kHz~3.6GHz | 1Hz~10MHz | -102dBc/Hz @10kHz | -165dBm | Yes | 10.1 inch TFT LCD(touch screen) |
Technical Specification
| Model | UTS3084A | UTS3060A | UTS3036A |
| Key Specifications | |||
| Frequency Range | 9 kHz to 8.4 GHz | 9 kHz to 6 GHz | 9 kHz to 3.6 GHz |
| DANL | Up to -165 dBm (Typ.) | ||
| Phase Noise | < -102 dBc/Hz @ 1 GHz, 10 kHz offset (Typ.) | ||
| Analysis Bandwidth | 10 MHz standard; 40 MHz optional | ||
| RBW | 1 Hz to 10 MHz | ||
| Sweep Points | 40,001 | ||
| Technical Details | |||
|---|---|---|---|
| Frequency Resolution | 1 Hz | ||
| Span Range | 0 Hz; 100 Hz to 8.4 GHz | 0 Hz; 100 Hz to 6 GHz | 0 Hz; 100 Hz to 3.6 GHz |
| Span Accuracy | Sweep: ±[0.25% × span + span/(points-1)]; FFT: ±[0.10% × span + span/(points-1)] | ||
| Sweep Time | Zero span: 1 μs to 4000 s; non-zero span: 1 ms to 4000 s | ||
| Video Bandwidth (VBW) | 1 Hz to 10 MHz | ||
| Selectivity (-60 dB/-3 dB) | <4.8:1 (Nom.) | ||
| Reference Level | -102 dBm to +30 dBm, 1 dB steps | ||
| Preamplifier | Standard, 20 dB (Nom.) | ||
| Total Absolute Amplitude Accuracy | <0.7 dB | ||
| Trace Detectors | Sample, Peak, Negative, Normal, Average | ||
| Trace Types | Clear/Write, Average, Max Hold, Min Hold | ||
| Scale Units | dBm, dBmV, dBμV, V, W | ||
| Marker Modes | Normal, Delta, Fixed | ||
| Marker Functions | Marker Noise, Band Power, Band Density, N dB, Counter | ||
| Features | |||
| Real Time Spectrum Analysis | Standard | ||
| Advanced Measurement | Optional | ||
| Analog Modulation Analysis | Optional | ||
| Vector Signal Analysis | Optional | ||
| Phase Noise Analysis | Optional | ||
| IQ Analysis | Optional | ||
| EMI Analysis | Optional | ||
| LTE | Optional | ||
| 5G NR | Optional | ||
| VNA | Standard: S11, S21, DTF | ||
| General Information | |||
| Display | 10.1-inch TFT touchscreen, 1280×800 | ||
| Interface | RF input, tracking generator output, 10 MHz Ref In/Out, Ext Trigger, HDMI, USB Host/Device, LAN, headphone | ||
| Power | 100–240 VAC (±10%), 50/60 Hz; 100–120 VAC (±10%), 400 Hz | ||
| Product Net Weight | 4.96 kg | ||
| Product Dimensions (W×H×D) | 378 × 218 × 120 mm | ||
| Standard Quantity Per Carton | 1 pc | ||
| Certification | CE, cETLus | ||
| Warranty | 3 Years | ||
DATA SHEET
QUICKSTART GUIDE
MANUAL
SOFTWARE
FIRMWARE
UTS3000A Firmware
Current Version: V1.04.0079 | 2026/4/8
Release Notes
UTS3000A Firmware
Compatibility: Hardware version IF:V1.05.0000，RF:V1.01.0000
……………………………………………………………………………………………………………………………………………………
Version: V1.04.0079
Date: 2026/4/7
Update：
1. Optimize the reference amplitude calibration (with the amplifier turned off, use the calibration value of the 40 dB range for all ranges where the absolute amplitude is above 40. Modify the calibration frequency of the upper computer to 100.001 MHz to avoid the impact of residual responses).
2. Fix some bugs
……………………………………………………………………………………………………………………………………………………
Version: V1.04.0050
Date: 2025/9/11
Update：
1. Fixed issue where adjusting RBW baseline noise altered in VNA mode
2. Fixed TG 0dBm overload issue
3. Fixed POI time update error in real-time mode
4. Optimized trace display in one window
5. Enabled simultaneous display of S11 and S21 in single window during VNA mode
6. Resolved several bugs
……………………………………………………………………………………………………………………………………………………
Version: V1.04.0040
Date: 2025/6/20
Update：
1. Modified the storage logic for factory trial and factory mode countdown.
2. Added forced upgrade via USB drive using factory upgrade package. (USB drive must be FAT32 formatted with a directory named "utsx_upgrade_forced" containing upgrade files. Press and hold the power button for 5+ seconds during startup until upgrade information appears on screen, then wait for automatic restart.)
3. Fixed DANL issue.
4. Fixed other BUGs.
……………………………………………………………………………………………………………………………………………………
Version: V1.04.0023
Date: 2025/2/20
Update：
1. Fixed SCPI PEAK exit bug.
2. Fixed variable names mismatch in reference calibration files.
3. Optimized SCPI instruction may contain IDN information.
4. Fixed some BUGs.
……………………………………………………………………………………………………………………………………………………
UTS3000A Firmware
Current Version: V1.04.0050 | 2025/9/20
Release Notes
UTS3000A Firmware
Compatibility: Hardware version IF:V1.05.0000，RF:V1.01.0000
……………………………………………………………………………………………………………………………………………………
Version: V1.04.0050
Date: 2025/9/11
Update：
1. Fixed issue where adjusting RBW baseline noise altered in VNA mode
2. Fixed TG 0dBm overload issue
3. Fixed POI time update error in real-time mode
4. Optimized trace display in one window
5. Enabled simultaneous display of S11 and S21 in single window during VNA mode
6. Resolved several bugs
……………………………………………………………………………………………………………………………………………………
Version: V1.04.0040
Date: 2025/6/20
Update：
1. Modified the storage logic for factory trial and factory mode countdown.
2. Added forced upgrade via USB drive using factory upgrade package. (USB drive must be FAT32 formatted with a directory named "utsx_upgrade_forced" containing upgrade files. Press and hold the power button for 5+ seconds during startup until upgrade information appears on screen, then wait for automatic restart.)
3. Fixed DANL issue.
4. Fixed other BUGs.
……………………………………………………………………………………………………………………………………………………
Version: V1.04.0023
Date: 2025/2/20
Update：
1. Fixed SCPI PEAK exit bug.
2. Fixed variable names mismatch in reference calibration files.
3. Optimized SCPI instruction may contain IDN information.
4. Fixed some BUGs.
……………………………………………………………………………………………………………………………………………………
UTS3000A Firmware
Current Version: V1.04.0040 | 2025/7/23
Release Notes
UTS3000A Firmware
Compatibility: Hardware version IF:V1.05.0000，RF:V1.01.0000
……………………………………………………………………………………………………………………………………………………
Version: V1.04.0040
Date: 2025/6/20
Update：
1. Modified the storage logic for factory trial and factory mode countdown.
2. Added forced upgrade via USB drive using factory upgrade package. (USB drive must be FAT32 formatted with a directory named "utsx_upgrade_forced" containing upgrade files. Press and hold the power button for 5+ seconds during startup until upgrade information appears on screen, then wait for automatic restart.)
3. Fixed DANL issue.
4. Fixed other BUGs.
……………………………………………………………………………………………………………………………………………………
Version: V1.04.0023
Date: 2025/2/20
Update：
1. Fixed SCPI PEAK exit bug.
2. Fixed variable names mismatch in reference calibration files.
3. Optimized SCPI instruction may contain IDN information.
4. Fixed some BUGs.
……………………………………………………………………………………………………………………………………………………
UTS3000A Firmware
Current Version: V1.04.0023 | 2025/2/19
Release Notes
UTS3000A Firmware
Compatibility: Hardware version IF:V1.05.0000，RF:V1.01.0000
……………………………………………………………………………………………………………………………………………………
Version: V1.04.0023
Date: 2025/2/20
Update：
1. Fixed SCPI PEAK exit bug.
2. Fixed variable names mismatch in reference calibration files.
3. Optimized SCPI instruction may contain IDN information.
4. Fixed some BUGs.
……………………………………………………………………………………………………………………………………………………
OTHER DOWNLOADS
Device Manager
Current Version: V2.8 | 2025/7/21
Release Notes
Device Manager
……………………………………………………………………………………………………………………………………………………
Version: 2.8
Date: 2025/7/21
1. Added support for UTG4000X and UTS7000A series models.
2. Reconstructed the UI display of Arbitrary Wave Editor V2.0.
3. Added a zoom window function to Waveform Analysis Software V2.0.
4. Fixed some known bugs.
……………………………………………………………………………………………………………………………………………………
Version: 2.7
Date: 2025/4/28
-new: add USG3000、USG5000、UPO1000HD、MSO1000HD、UPO2000HD、MSO5000HD Series
-fix: some known bugs
……………………………………………………………………………………………………………………………………………………
Version: 2.6
Date: 2024/7/31
-new: add MSO3000HD Series, UTS3000A series
-fix: some known bugs
-update:
1. New Arbitrary Waveform Editor V2.0 version.
2. New waveform editor software V2.0 version of the waveform recording and measurement, deep storage waveform analysis and other functions.
……………………………………………………………………………………………………………………………………………………
Version: 2.4
Date: 2024/4/25
-new: add MSO2000X Series, MSO3000X Series, UTS5000A series
-fix: some known bugs
……………………………………………………………………………………………………………………………………………………
Version: 2.2
Date: 2024/3/20
Supported Devices：
Waveform Generators: UTG9000T Series, UTG900E Series, UTG1000X Series, UTG4000A Series（HW2.0）, UTG1000X Series, UTG2000X Series
Oscilloscopes: UTD2102CEX+ Series, UPO1000CS Series, UPO1000 Series, MSO2000E Series, MSO3000E Series, MSO2000X Series, MSO3000X Series
Spectrum/Signal Analyzers: UTS3000B Series, UTS1000B Series, UTS5000A Series
Please note that these updates are aimed at improving the performance and stability of the software. We recommend updating to the latest version for a better user experience. If you encounter any issues while using the software, please contact our technical support team.
Thank you for your support and usage of our software!
Videos
AM function
FM function
IQ function
PM function
VNA function
VSA function
RTSA function
OPTIONS
